Features

SAME MOTION SPECS AS THE BASE MACHINE  ·  2″ (51 mm) POWERED VERTICAL TRAVEL

Height control Amperage-sensing, maintains constant tip-to-work distance
Vertical travel 2″ (51 mm), motorised slide
Cut-off Shuts off automatically when current drops below approximately 60 amps
Arc-strike delay Built-in time delay after arc strike
Override Manual jog, plus auto/manual switch on the CAS-1555 electronics box
Travel speed 3-70 in/min  (76-1778 mm/min)
Weave speed 4-100 in/min (102-2540 mm/min)
Weave width 0.1-2″(2.5-50.8 mm)
Dwell 0-3 seconds, left and right
Steering 2″ (50.8 mm) either side of centre; 4″ (101.6 mm) total
Load capacity 30 lbs (14 kg)
POWER SOURCE REQUIREMENT Constant voltage (CV) required. All Bug-O automatic height controls require a CV power source.
Voltage BUG-6550 (120 VAC) · BUG-6552 (240 VAC) · BUG-6554 (42 VAC), 50/60 Hz single phase
Rails and carriages As the base Universal Bug-O-Matic
Retrofit to a base machine
BUG-6553 (converts BUG-5700 to BUG-5704)