Features

STAND ALONE PENDULUM WEAVER  ·  SPEED TO 200 IPM  (5080 mm/min)  ·  2″ (50 mm) STROKE

Motion Pendulum — suited to fillet welds in corner joints
Weave speed To 200 in/min (5080 mm/min)
Stroke 2″ (50 mm), measured at a 6″ (152 mm) radius
Dwell 0-3 seconds, left or right
Steering 2″ (50 mm) each side of centre; 4″ (100 mm) total
Weave cycles 2 cycles/sec at ¼″ (6 mm) stroke · 1 cycle/sec at 1″ (25 mm) stroke, at maximum speed and zero dwell
Load capacity 10 lbs (4.5 kg)
Gearbox Heavy duty planetary with powerful output shaft
Power consumption 40 watts
Gearbox dimensions 3.3″ W x 4.1″ H x 5.7″ L  (84 x 104 x 145 mm)
Control box dimensions 5.13″ L x 5.0″ W x 4.13″ H  (130 x 127 x 105 mm)
Mounting Welding fixture, drive carriage, or directly on a Bug-O drive unit with power supplied through
Power BUG-6350 120 VAC · BUG-6352 240 VAC · BUG-6354 42 VAC, 50/60 Hz
Control box dimensions 5.13″ L x 5.0″ W x 4.13″ H (130 x 127 x 105 mm)
Mounting Welding fixture, drive carriage, or directly on a Bug-O drive unit with power supplied through
Power BUG-6350 120 VAC · BUG-6352 240 VAC · BUG-6354 42 VAC, 50/60 Hz